Small machine corrugated small pipe plastic / machine corrugated small pipe plastic / plastic pipe machine

Product DescriptionSingle wall corrugated pipe machineWe have 22 years experience for the single wall corrugated pipe machine,our machines are suitable for the corrugated pipe range from 4.5mm to 160mm,our high speed type can reach 25m/min.We have sold more than 100 sets of corrugated pipe machines to 30 countries and regio

Featured Products

Product Description

Single wall corrugated pipe machine

We have 22 years experience for the single wall corrugated pipe machine,our machines are suitable for the corrugated pipe range from 4.5mm to 160mm,our high speed type can reach 25m/min.We have sold more than 100 sets of corrugated pipe machines to 30 countries and regions

SJDBGZ Series Plastic Single-wall Corrugated Pipe Extrusion Line
The machine to produce corrugated pipes of PE\PP\EVA\PVC\PA\nylon.This production line with good performance and reasonable price,it will be the best choice for your producing single-wall corrugated pipe.

Small Machine Corrugated Small Pipes Plastic /Machine Corrugated Small Pipes Plastic/Plastic Tube Machine

Details for plastic corrugated pipe machine
 
1,Automatic feeder with dryer

In order to save manpower and efficient work, each extruder is equipped with an automatic feeder which  can be set to either automatic loading or manual feeding. Automatic feeding ensures continuous production and no downtime due to lack of raw materials.On the other hand, the dryer can be kept full of materials and the drying effect will be very excellent.Automatic material loading facility to extruder hopper necessary to be included.

Constructional & Operational Features:

A,The turbo-pump will inhale the air in the autonomic material convery so that the inlet of the material and the whole system will be in vacuum.
B,The materials along with the outer air will be inhaled into the hopper through the inhaling tube.
C,The materials and the air will be separated and the material particles fall down into the hopper in the drying device that will be connected with the extruder.
D,According to the central ventilating and drying principle, the device will have to be designed. It will have high heating efficiency and will dry homogeneously.
E,Two devices will work at the same time so that the autonomic conveying and drying can be achieved.

Small Machine Corrugated Small Pipes Plastic /Machine Corrugated Small Pipes Plastic/Plastic Tube Machine

2,Main single screw extruder

The extruder consist of the screw pole, cylinder, reducer, extruder head's stand, the water and wind cooling system, the lubricating system, temperature-controlling system, speed-changing cabinet etc.All the parts be made by reputed manufacturer and the reputed supplier brand.
We adopt special screw for different raw material and different pipe diameter, so the raw material can be well plasticization and get goo quality pipes.The extruder will suit many standards and applications in the corrugated pipe manufacturing. A unique screw and barrel combination, perfected through theoretical studies.The screw pole will be made of alloy steel and processed nitrogenous. It will have excellent ability of hardness. At the same time, it will be wear-resisting and corrosion-resisting.

Proven design and reliability is the main features of the low noise gearbox. Splash lubrication will ensure minimum maintenance requirements.The gears in the reducer and the bearings will be lubricated by the standard way.At the same time, the lubricating system of the oil pump will be designed to circulate the machine oil compulsively.

Energy efficient generators come from the Siemens brand. Moreover, the motor and the reducer are directly connected through the coupling, which service life is longer.

3,Forming machine

We have two type of forming machine according the module connection method.One is the module block assembled through the chain shaft,and the chain pieces, then drive by the gears to move on the bottom plate.The bottom plate can be cooling by circled water and the mold block can be cooling by the fan air.
The other is the high speed type,all the module block been arranged on the track of the forming machine, there are driven by the up and down double gears to run in a high speed.The module can be cooling by both water and fan air.Efficient cooling ensures the module  block cooling down quickly, so it is easy to get good quality of the single wall corrugated pipe in high speed production.

Based on the tube type requirements of the corrugated pipes, we have developed a vacuum forming system to ensure the production of various shaped pipes.Our single wall corrugated pipe machines can produce fixed length inlet pipes and drains for washing machines, and can produce shrinkable pipes with joints ,round and flat  prestressed  plastic corrugated pipes,etc.

Small Machine Corrugated Small Pipes Plastic /Machine Corrugated Small Pipes Plastic/Plastic Tube Machine


 
1.Water cooling under template, wind cooling on machine two sides.Two types cooling method to guarantee
Production speed2.Vacuum forming to guarantee good product quality.

4,Mould block:

We have professional mold design technicians,mold processing machines,machining center machines.We can design and process kinds of corrugated pipe module block,corrugated pipe joint module blocks,letter engraving module blocks and other types corrugated pipe block for any kinds of corrugated pipe according customer's requirements.All the module blocks are specialized grinding apparatus steel,which is of high hardness and strong wear resistance.

We have been committed to the research, continuous development and innovation of corrugated pipe production equipment.We can  design and make the production lines according to customer requirements.Such as the corrugated pipe outer layer with coating production line,the corrugated pipe with steel line pass through device.

Small Machine Corrugated Small Pipes Plastic /Machine Corrugated Small Pipes Plastic/Plastic Tube Machine


 
1.Make mould by our own CNC machine to control the whole line quality2.Mould material:40Cr with vacuum channel
3.Mould design:According to customer request
 

5,Automatic double position winder

We can provide the whole line for corrugated pipe making machine.Such as ,the automatic corrugated pipe winding machine which adopt polishing rod wire traverse for winding displacement.The automatic cutting machine is  a  special cuter for the car harness single wall corrugated pipes.The automatic tapping machine is special used for car harness and electrical wire protective conduit.The automatic shrinkable device for the single wall corrugated drain pipe.
We provide dies, heater,thermocouple, high temperature plug ,guiders,  and other related necessary tools of very high quality and long time usable for producing of different types of single wall corrugated pipes.Machine operation related tools (complete set) for opening and closing of extruder screw, head & other related parts will have to be supplied along with the machine

Small Machine Corrugated Small Pipes Plastic /Machine Corrugated Small Pipes Plastic/Plastic Tube Machine
6,Electrical cabinet
You can choose the  PLC type controller

1,Main power will  be controlled by ABB inventer
2,the equipment will adopt industrial computer or operation display (with touch screen facility) and programmable logic control (that is IPC+PLC mode) to realize the line's synchronized running and the independent operation including alarm system.

3,The production operation and the parameter set including zone temp setting and display will be carried out through the touch screen display.

4,The production state collection and progress control will be realized on PLC, such as the motor start-up and stop, the given signal, Current, the motor speed and so on.

5,The Display will communicate with PLC, which can realize the production operation, the warning display, the line's emergency and other functions.

6,PLC based Synchronising system for the  extruder and forming machine.

7,The display will be installed in the electrical cabinet, rationally and gracefully.

8,PLC (programmable logic control) will adopt high-quality Siemens series products

9,The machine will also adopt AC converters, air-switch, contactor and other main low-pressure products of Siemens products or other reputed suitable brand.

10,The machine will also adopt RKC, Japan temperature measuring unit or other suitable reputed brand.

11,The heat power control will have to be use by solid-state relays.

12,The power can be supplied from three-phase and five-wire syste


Classification of the single wall corrugated pipe machine machine

1)According to raw material classification :
PP/PE/EVA granules single wall corrugated pipe machine
PVC granules/powder single wall corrugated pipe machine
PA Nylon granules single wall corrugated pipe machine
2)According to  producton speed
Common speed single wall corrugated pipe machine 3-8m/min
High speed single wall corrugated pipe machine 10-25m/min
3)According to pipe application
Common single wall corrugated pipe machine for electrical wire thread-passing pipes / Circuit of machine tool /wire harness protection pipe of lamps and cars
Compromise joint single wall corrugated pipe machine for the air conditioner pipe / washing machine inlet and out pipe/bathroom drain pipe/medical pipe/hookah shisha pipe
Shrinkable single wall corrugated pipe machine for lavatory pipe/medical pipe
Punching spiral corrugated pipe making machine for foreshore reclamation land pipe/urban mud water drawing pipe/afforestation field pipe
PE-prestressed plastic corrugated pipe extrusion line for concrete structures pipe

4.5-160mm corrugated pipe making machine

Small Machine Corrugated Small Pipes Plastic /Machine Corrugated Small Pipes Plastic/Plastic Tube Machine
This Plastic Single Wall Corrugated Pipe extrusion machine made by Qingdao Tongsan Plastic Machinery
Company is used to produce PP, PE, PVC, EVA, PA and other material single-wall corrugated pipes continuously.
Plastic single wall corrugated pipes have features of strong thermo-stability, corrosion resistance, abrasion resistance, high intensity, good flexibility, etc.
Single wall corrugated pipes are widely applied in many fields such as electrical thread-passing pipes, circuit of machine tool,protective pipe of lamps, water pipes in air conditioner, washing machine, bathroom, etc.
Pipe diameter range
4.5mm-12mm
9mm-32mm
12mm-63mm
32mm-110mm
50mm-160mm
Model of extruder
SJ45
SJ50
SJ65
SJ75
SJ90
Production capacity
20-30kg/h
40-50kg/h
60-70kg/h
70-90kg/h
100-120KG/H
Power of extruder
7.5kw
15kw
30kw
37kw
55KW
Power of forming machine
1.1kw
1.5kw
4kw
4kw
4KW
Pairs of modules
42pairs
50pairs
50pairs
72pairs
72pairs
Cooling mode
Wind&Water cooling
Wind&Water cooling
Wind&Water cooling
Wind&Water cooling
Wind&Water cooling
Production speed
6-10m/min
8-12m/min
8-12m/min
2-6m/min
2-6m/min

High speed single wall corrugated pipe making machine

Small Machine Corrugated Small Pipes Plastic /Machine Corrugated Small Pipes Plastic/Plastic Tube Machine
GSDBGZ high speed plastic pipe extruder machine 4.5-53mm single wall corrugated pipe production line is developed on the basis of our original single-wall corrugated pipe machine.
The molds are moved by gear on the runway.It is equipped with specially designed water cooling sealing system, and the
Lubrication oil can be injected automatically.
In the forming machine, for small sizes mould, it can be set with two mould chambers which can make two different sizes of pipes only by adjusting the height of forming machine automatically.
All these features improve the production speed of single wall corrugated pipes to a great extent, which can reach 20-25m/min.
Besides, the production line is equipped with pre-stress eliminating cooling device, automatic tapping machine in production line and automatic coiling machine, and it is especially suitable for the production of car harness corrugated pipes.
Pipe diameter range
Pipe diameter range
9mm-50mm
9mm-53mm
(Pipe with joint)
Model of extruder
SJ45B
SJ65B
SJ65B
Production capacity
20-30kg/h
60-80kg/h
70-90kg/h
Power of extruder
7.5KW
30KW
37KW
Power of forming machine
1.1KW
4KW
4KW
Pairs of modules
63 pairs
72pairs
72pairs
Cooling mode
Water cooling
Water cooling
Water cooling
Production speed
10-20m/min
20-25m/min
20-25m/min

Corrugated pipe application
Plastic corrugated pipe has the characteristics of light weight, strong bearing pressure, excellent bending performance and easy construction. Compared with other drainage materials, plastic bellows have the advantages of strong corrosion resistance, strong water permeability and high cost performance.

Plastic corrugated pipe is a kind of corrosion-resistant, water-permeable pipe. In recent years, plastic corrugated pipes have become more and more widely used. Compared with metal corrugated pipes, plastic corrugated pipes are not conductive and can prevent stray In addition, the plastic corrugated pipe has good bending performance and is convenient for construction.

Plastic corrugated pipes (PA, PE, PP) are widely used in the wiring connection of machine tool machinery and electrical box control cabinets, and are equipped with plastic quick connectors. It is widely used in automotive wiring harness, electronic, mechanical wiring harness and other fields, replacing the original PVC and metal sheath products, and becoming a widely used wiring harness sheath product on the market. In addition, plastic corrugated pipes are also used in municipal engineering, underground burying of rainwater in residential quarters, sewage discharge, irrigation of farmland, drainage of waterlogging, etc.

Small Machine Corrugated Small Pipes Plastic /Machine Corrugated Small Pipes Plastic/Plastic Tube Machine



Small Machine Corrugated Small Pipes Plastic /Machine Corrugated Small Pipes Plastic/Plastic Tube Machine
Our Customer for corrugated pipe making machines
Asia
AfghanistanBahrainBangladeshIndiaIndonesia
IranKuwaitMalaysiaMongoliaOman
PakistanQatarSaudi ArabiaSriLankaTurkey
UAEVietnameseYemenSouth Korea 
Africa
AlgeriaBurundiCameroonBotswanaCongo
EgyptDjiboutiEthiopiaSouth AfricaCote Divoire
KenyaLibyaMaliMauritiusMorocco
NigeriaSudanTanzaniaTunisiaUganda
Europe
BelgiumBulgariaPolandBelarusGeorgia
KazakhstanKyrgyzstanUzbekistanTajikistanTurkmenistan
UkraineLithuania   
America
ChileColombiaDominicaEcuadorMexico
PeruUruguayVenezuela  


Our Main Machine
Single wall corrugated pipe machine

Doube wall corrugated pipe machine

PP PE PC Plastic corrugated hollow sheet making machine

PVC Plastic window profiles making machine

PVC WPC door frame making machine

PE WPC Profiles making machine

PVC WPC foam board making machine

Wood plastic composite doors making machin
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours